1. A Criminal Technician, apparently overlooked the dirt and focused the problem as the SP was too sensitive – WRONG!
2. The Criminal Technician to correct the problem, JUST LEFT LOOSE A RESISTOR inside the PAPIMI device – INTENDED CRIME !
3. The Criminal agency which employed the technician, signed a false “legal looking” form of confirmation and repair, with a vague declaration which in our best interpretation is: (sensor) resistor downsized, as it should had been done in case the SP warning system was too sensitive – FALSE ACCUSATION, PAPIMI DEFAMATION, MISLEADING AND DAMAGING THE PROFESSIONAL USER.
- Actually the Criminal agency sabotaged the device by leaving a resistor loose and unsoldered ( red circle area ), close where it should had been installed - in case the SP warning system was too sensitive. This action of this unauthorized technician could have caused unpredictable danger and damages – INTENDED CRIME.
4. The Criminal agency, did not recommend the proper cleaning of the device and the use of an exhaust, but made a false declaration that the problem of the device was factory defect and non repairable and handled it to the professional user. CRIME, MISLEADING AND DAMAGING THE USER.
The initial fact was: The device accumulated too much dirt, by the intensive professional use, and by not (agency) suggesting to use an exhaust as factory recommended.
Instead, the filter was used, which was used too long before it was attempted to be renewed
A RESISTOR (RED CIRCLE) WAS LEFT LOSE BY THE CRIMINAL TECHNICIAN INSIDE THE PAPIMI !
THE RESISTOR PRESUMABLY (judging from its 1kohm value and its proximity) WAS INTENDED TO BE CONNECTED ACROSS THOSE TWO CABLES (BLUE CIRCLE AREA ) TO DESENSITIZE THE SP ALARM. (ACCORDING TO FACTORY RECOMMENDATION, IN CASE IT WAS INDEED TOO SENSITIVE).
